What Is The REM And Where To Use REM
The meaning of REM is the Remote Elevation Measurement. This is the Surveying Command use In total station machine find for Height of building.
What Is The REM
The meaning of REM is the Remote Elevation Measurement. This is the Surveying Command use In total station machine find for Height of building. Before I was upload the article How to Calculate The Height of Building with Auto Level . And now we find the height of building with total station.
Where To Use REM
REM is the one command use in surveying work for find the height of building. this is the basic command using is that location where we cannot use measuring tape to find the height of building. Very easy to find the height of and structure with this command.
How To Find The Height Of Building with Total Station
We can find the height the height or building or any structure with help of Total Station Machine. This is the survey equipment using in civil or mechanical work for layout installation the anchor bolt make the foundation, building, bridge, or any construction using the Total station. we also use Total station machine for marking the co-ordinates direction of building, center line of building or pipe line, road center line etc.
Now We explain How to find the Height Of building with the help of REM Command is bellow mentioned step.
Frist we take the Total Station machine with accessories like tripod stand Prism and then setting the total station machine. must be know how to setting the total station machine. This is the important step to know setting of machine.
What Is The Total Station Machine And Parts
What Is The Setting of Total Station Machine
The meaning of Setting of Total Station machine is the Centering, leveling And Focusing.
What Is the CenteringÂ
The meaning of Centering is the set the machine on the given point. we open the tripod stand and putt the total station machine on the tripod and put on the point with the help of centering of eyes glass.
What Is The Leveling
when finishing the centering then do the leveling horizontal leveling and vertical leveling.
What Is The Focusing
When complete the leveling then do the focusing like set the machine telescope on the object and check to clear face with the help of focusing screw.
NOW
when complete the all step of Setting of Total Station Then we do next step for find the height of building. open the machine screen open the mane menu and select the Command for REM and then select the object on the bottom click the yes and then move the telescope on the top of the building and then click the measure. then showing on the screen height.
Other post
Uses of the Leveling and Principles of Differential Leveling
What Is The Basic Step For Construction Foundation
How To Calculate The Bar Bending Schedule For Combined Foundation
THANKS
[…] What Is The REM And Where To Use REM […]