Why Provide The Bent Up Bar In The Column Beam And Slab

Using the crank of bent up bar in the slab the location of the bentup bar is the top of all bar for resistance to the negative moment on the slab supports. Using the bentup bar or crank bar in the beam for resistance against the shear force and also the shear force resist with the verticle ties. when the shear force is the more high and the very small spacing between the vertical ties.Why Provide The Bent Up Bar In The Column Beam And Slab |What Is The Slab |Why provide The Bentup bar /Crank Bar in Slab |What Is The Beam |Why provide The Bentup bar /Crank Bar in Beam |What is the Column |Why provide The Bentup bar /Crank Bar in Column

What Is The Slab?

The slab is the horizontal Rcc member of the building and this is the main part of the may building. The slab is the top cover of the all wall slab is also use for floor road paveing skid foundation or any tank foundation.

Why provide The Bentup bar /Crank Bar in Slab

Using the crank of bent up bar in the slab the location of the bentup bar is the top of all bar for resistance to the negative moment on the slab supports and also resistance against the shear force on the supports for increasing the strength and reduced the failure percentage of the slab on the connection of RCC column and slab.

What Is The Beam?

The Beam is the also horizontal members of the RCC Structures. The purpose of the beam is transfer the load form center to edge of the all building. The beam is two types lintel beam and plinth beam. when is clear span is more then 3 meter between two column then provide the Rcc beam.

Why provide The Bentup bar /Crank Bar in Beam

Using the bentup bar or crank bar in the beam for resistance against the shear force and also the shear force resist with the verticle ties.

What is the Column?

The Column is the vertical And Important RCC member of the building. The different shapes of the column circular column sequres column retangle column. the basic purpose of the column is shifted the load from top to bottom.

Why provide The Bentup bar /Crank Bar in Column

The reason of the bent up bar and crank bar use in the column for resistance the shear force. The using of the bentup bar or crank in the column when the shear force is the more high and the very small spacing between the vertical ties. This is basic reason for using the bentup bar

Other Post

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here